Colorbond, timber, pool and rural fencing across the Toowoomba region
Fencing Toowoomba Homeowners Can Plan Around
Most fencing jobs here stall in one of two places: nobody turns up to measure, or the conversation with next door has not happened yet. Tell us about the fence line and you get a measured site visit and a written quote that spells out material, run length, removal of the old fence and access, so you can compare it properly and put it in front of your neighbour.
- Toowoomba fencing installed by local fencing contractors
- In Queensland, paid fencing work valued at $3,300 or more needs a QBCC-licensed contractor - rural wire fencing and some owner-built fences are exempt
- Pool fencing is built to the Queensland pool safety standard
- Clear site measure and written quote before any work begins
Start where you are up to
Some people arrive knowing exactly which fence they want. Others are still working out whose fence it legally is. Both are fine.
Fencing Toowoomba blocks are actually built with
A Colorbond fence is the workhorse for a boundary fence here: fast to erect, no painting, and a colour range that sits quietly against brick and render. A timber paling fence still suits character streets, and a lapped and capped fence is the step up when you want no gaps at all. PVC fencing removes painting altogether, aluminium slat fencing reads as a modern street frontage rather than full privacy screening, and glass pool fencing is a compliance job before it is a style one. Out on acreage it is ringlock rural fencing, post and rail fencing and strained wire; for business premises, chain wire fencing and tubular steel. Driveway gates and gate automation are built to suit whatever fence line they hang off, and fence repairs are worth pricing before you commit to a whole new run.
Before you commit
Whose dividing fence is it, and who pays for what
If the fence sits on the boundary it is a dividing fence, and Queensland has a process for sharing the cost. Under the Neighbourhood Disputes (Dividing Fences and Trees) Act 2011, adjoining owners generally contribute equally to a sufficient dividing fence - for residential land that means roughly 0.5 m to 1.8 m high, substantially of prescribed materials such as palings, chain wire, metal panels or brick. If you want more than that, the difference is on you, which is the part that surprises people upgrading to a taller Colorbond run.
Talking to your neighbour first, with a written quote in hand, resolves most of these. Where it does not, a notice to contribute is the formal step: an approved form naming the land, the fence line, the work and the estimated cost, with at least one written quotation attached. If there is no agreement within one month, either owner can apply to QCAT within two months of the notice. We can invoice each owner their own share so nobody is chasing the other for money. What nobody can promise you is the outcome, and any site that tells you your neighbour must pay half of a premium fence is guessing.
General information as at July 2026. The current rules are published by the Queensland Government and dividing-fence disputes are heard by QCAT.
Height, corners and pool barriers
- Up to 2 m above natural ground level a fence is generally accepted development in Queensland. Above 2 m it becomes building work and needs approval from a certifier.
- A fence sitting on a retaining wall is measured as the combined height, so a modest wall plus a standard fence can cross the 2 m line without anyone intending it to.
- Corner blocks have sight-line truncations at the intersection, so front fencing there is kept low enough for drivers to see across.
- Pool barriers are a separate regime again, built to the Queensland pool safety standard and certified by a licensed pool safety inspector, not by us and not by a checklist.
What is it per metre, and why do quotes differ
Fencing is priced per metre of run, which is why two quotes for the same back fence can be hundreds apart. It is almost always one of these five things, and the fastest way to compare quotes is to check each of them is on the page.
Material and height
A lapped and capped fence (palings overlapped with a capping board on top, so there are no gaps) costs more per metre than butted palings, and a 1.8 m run costs more than a 1.2 m one.
Run length and gates
Longer runs spread the set-up cost further. Gates are their own line: hardware, a heavier post and, for automation, a motor and power.
Slope and stepping
Sloping blocks through Rangeville and Mount Lofty need stepped or raked panels, which takes more posts and more time than a flat run at Glenvale.
Digging and access
Red basalt soil on the range is rocky to dig. A back fence a post-hole digger cannot reach is hand-dug, and that shows up in the labour line.
Removing the old fence
Pulling out and dumping the old run, especially concreted posts, is often quoted separately, which is why two quotes on the same job can look so different.
Work out a rough range
The cost calculator takes your run length, height and expected rate per metre and shows an indicative range with a site allowance applied, so you can sanity-check a quote before anyone visits.
Open the cost calculatorWhy people go ahead with us
Not because of a star rating. Because the scope is measured on your block, the work is carried out by someone licensed to do it, and the quote spells out what is and is not included before you decide anything.
Local fencing contractors
Your fence is measured, quoted and installed by fencing contractors working across Toowoomba and the Darling Downs, QBCC-licensed where the job value requires it.
Built for Downs conditions
Footing depth and post spacing set for reactive black soil and exposed range-edge wind, so gates stay plumb and panels stay tight.
Compliance handled properly
Pool barriers built to the Queensland pool safety standard, and building approval arranged where a fence goes above 2 metres or sits on a retaining wall.
Written quotes, no obligation
Tell us about the fence line and get a written quote that spells out material, run length, removal of the old fence and site access.
What happens after you send the form
- 1. We read the details and come back to you. If the fence line is unclear we will ask about the boundary, the neighbour and the height before quoting anything.
- 2. Someone measures on site. Run length, slope, access, ground type and what has to come out first. A quote built off a satellite image is how you end up with a price for the wrong fence line.
- 3. You get a fixed written quote. Material, metres, gates, removal and disposal as separate lines, with a validity period on it. Variations only where the site turns up something a measure could not see, agreed in writing first.
- 4. Nothing is owed to look. The measure and the quote cost you nothing, and payment terms are set out before any work is booked.
Fencing across Toowoomba
From the character streets of East Toowoomba and Newtown to the new estates at Glenvale, Westbrook and Highfields, the ground changes and so does the fence that suits it. Pick your suburb for the local notes on soil, slope and access.
Next step
Tell us about the fence line and we will get you a real number
Rough metres is plenty to start with, and pacing out the run is close enough. If a neighbour is involved, say so in the message and we will quote it in a form you can hand over, and invoice each side separately if that is easier.
Not ready yet? The cost calculator gives you a range to work with, and the fencing project checklist walks through the boundary, notice and approval questions in order.
Fencing questions people ask first
Cost, the neighbour's share, council approval and whether a repair will do. There are more on the full FAQ page.
How much does fencing cost per metre in Australia?
Do neighbours have to split the cost of a boundary fence?
Do I need a permit to build a fence in Toowoomba?
Can you repair a fence instead of replacing it?
Request a fencing quote
Ready to get the fence line measured?
Send a few details to get a site measure and a written quote, with the removal and access lines shown separately.